10" mineral filter

Pure water of a R.O. system is very soft and contains less minerals. For breeding tanks, soft water tanks (Amazonian aquaria) or for sea water it is useable without any further conditioning. For east African tanks (lake Malawi, lake Tanganyika, etc.) the water must contain more minerals and a higher pH value.

The AquaCare Mineral Filter is filled with calcium carbonate granules. If the water of a R.O. system is pushed through this filter the water will contain more calcium and more carbonate hardness - the pH value will be higher. 

 The hardenup-efficiency depends on:

• size of the filter
• the carbon dioxid concentratin of the pure water of the reverse osmosis unit and
• the flow of the reverse osmosis unit

• Filter housing with mounting material (optional ready fixed on reverse osmosis unit;
  Attention! On RO unit fixed filters may change the wide of the RO unit. Custom-made products are excluded from conversion rights.
• refillable empty cartridge
• high-grade mineral granules: Turbo-Ca-Granules
• Detailed mounting and operation manual

For more hardness order a CO₂-connector, too. Then you need following parts:

• CO₂ supply consisting of CO₂ pressure tank, CO₂ pressure relief valve
• CO₂ check valve
• bubble counter

Maximum flow at 1 to 4°dH: 90 to 360 l/d*
Size: 10"
Dimensions: 15 x 15 x 31 cm
Volume: 0.7 litres
Connectors: 6 mm push fit fittings (others on request)
Filter material: Turbo-Ca-Granules
Operation pressure at 20°C: 0 to 8 bar
Operation temperature: 4 to 35°C
Connectors: 6 mm push fit fittings (others on request)

* The efficiency depends strongly on the CO₂ concentration of the pure water.

Leaflet

Instruction manual (only DE)

Info: Reverse Osmosis Technique

Technical units driven with water may leak as a basic principle and can cause water damages. If secondary damages are possible the unit should be protected by using leaking detectors, drip pan or others.