Energy saving pump aquabee UP8000e skimmer

• Pumpe with base plate
• Controler mit adjustment from 5 to 50 W in 5W-steps
• electronical transformer

Air flow at 30 cm water depth without counter pressure;
- the deeper the pump is submersed the lower the water flow and air input
- the higher the counter pressure (skimmer resistant) the lower the water flow and air input:
10W: 400 l/h air
20W: 1000 l/h air
30W: 1700 l/h air
40W: 2000 l/h air
50W: 2300 l/h air
Run-dry protection: yes (electronical)
Position ot the pump outlet: free turnable
Lenght of the cable pump - controler: 3 m (10 m on request)
Lenght of power cable: 1.8 m
Electrical connection: 100-240 V, 50-60 Hz
Power input: 60 W
Dimensions of the pump: (L x W x H): 169 x 100 x 152 mm
Dimensions of the controler: (L x W x H): 168 x 104 x 32 mm
Dimensions of the transformer: (L x W x H): 150 x 50 x 32 mm
Outlet connector (outer diameter): 32 mm
Inlet connector (outer diameter): 33.3 mm
Connector air inpit (outer diameter): 9 mm
Bearing axis/sleeve: polished ceramics / ceramics
Water touched materials: ABS (you can glue it with PVC glue), silicone rubber, NBR rubber, ceramic

Leaflet

Instruction manual DE, EN

Spare controller: FR8000.21
Spare transformer:
Impeller: FR8000.14/A
Pump housing: FR8000.16/A
Coupling nut for housing: FR8000.10
O-Ring pump housing: FR8000.15
Stand: FR8000.20
Tube connector d40: FR8000.17 (only pressuer side)
Union nut for tube connector: FR8000.18
O-Ring for tube connector: FR8000.19

The pump is not suitable for outdoor operation.
Operate the pump only with an earth-leakage circuit breaker < 30 mA.
Do not change or replace the mains cable. Remove  mains cable from socket before doing maintenance or cleaning.
Do not bend the cable and do not fix the pump at the cable.
In case of defect mains cable never use the pump - danger to life.