Not in stock
Energy saving pump BlueEco with electronically flow control / power control, run-dry protection, timer programms.
You can save more energy if you choose a too large pump that will be operated at lower speed. Additionally the noises will go down.
This sea water resistant high-efficiency pump has following advantages:
It is possible with a larger controler to upgrade this pump to a BlueEco 2200.
Maximum water flow: 85 m3/h
Maximum height: 14 m
Maximum pump power: 1500 W
Run-dry protection: yes (electronical)
Lenght of the cable pump - controler: 10 m (extension cable possible - please connect only one extension cable per pump)
Lenght of power cable: 1.1 m
Electrical connection: 220 V, 50-60 Hz
Degree of protection, pump: IP68 (waterproof up to 12 m)
Degree of protection, controler: IP64
Dimensions of the pump: (L x W x H): 38 x 22 x 13,5 cm
Dimensions of the controler: (L x W x H): 33,6 x 22 x 13,5 cm
Inlet connector (outer diameter): G3"
Outlet connector (outer diameter): G3"
Do the dimensioning after our brochure "Professional piping with PVC fittings"
Bearing axis/sleeve: tungsten-titanium / silica carbide
Pump cable: TPE (thermoplastic elastomer)
Pump housing: ABS-PC copolymer, Duplex steel (sea water resistant!)
Certificates: CE, TÜV
For BlueEco 1500 4Flow take the data below the dashed line at 1500 W.
WEEE-Reg.-No.: DE66405169
Operate the pump only with an earth-leakage circuit breaker < 30 mA.
Do not change or replace the mains cable. Remove mains cable from socket before doing maintenance or cleaning.
Do not bend the cable and do not fix the pump at the cable.
In case of defect mains cable never use the pump - danger to life.