Phosphate filter PO4-X-150: for 1200-2900 l aquariums

Product no.: PO4-X-150

In stock
Delivery period: 2-3 working days

from 615.11 €

Price incl. VAT, plus delivery

Model size

Ask question

Phosphate filter d150 filled with high-end phosphate adsorber for easy reduction of too high phsophate concentrations

This simple filter can be equipped with different sieves and connections. Additional valves (drain, vent) as well as an electrode connection (also retrofitted) can also be added.

Field of operation of the AquaCare Empty Filter:

this filter is optimally operated in the fluidized bed process

Characteristics of the AquaCare Phosphate Filter:

suitable of a very large field of filter materials
effective retention of the filter material by inlet and outlet screen
and of course , made of German quality acrylic material

Erection of the Phosphate Filter:

in the filter sump
external (beside, under or over the aquarium)
wall mounting

Necessary accessories:

water inlet supply with enough pressure (bypass of a main pump of a small pump)

The feed water from the aquarium is pumped into the system by means of a bypass of the main pump or an additional feed pump. The water flows from bottom to top through the filter. The phosphate is removed from the water and safely bound by the adsorber.

If the phosphate concentration falls below 0.05 mg/l PO4, the flow should be reduced. If it rises above 0.2 mg/l, please increase the flow rate. The maximum flow rate should not be exceeded, because otherwise the material accumulates on the upper sponge.

If the phosphate concentration in the aquarium rises again, the material must be replaced. - The material should be used in the filter without flushing.

Filter with lid and additional connections
Moving bed screen with deflector plate
Filter screen 15 mm with filter sponge and screen with spacer
Inlet ball valve with check valve
Outlet union
Drain ball valve for 6/4 hoses
Nozzle d25 for inlet and outlet
Silicone feet
1 filling High-End phosphate adsorber Phosphate-X-Globuli

Diameter: 150 mm
Reactor height: __ cm select the desired length
Useful volume: approx. __ litres select the desired length
maximum aquarium size: approx. __ litres select the desired length
maximum flow: 200...280 litres per hour
lower sieve: moving bed screen
upper sieve: 15 mm plus filter sponge
Footprint: 310 x 220 mm
Closure: PA-wing screws
Materials: high quality PMMA (acrylic glass), NBR, silicone, PA
Weight: __ kg select the desired length
Inlet: PVC ball valve d25 + check valve; a d25 hose nozzle is included in the delivery.
Outlet: ABS screw fitting d25; a d25 hose connector is included in the delivery
Drain connection: G1/4" drain valve for 6/4 hose
Lid connection: one G1/2" connection is available
Electrode connection in cover: prepared for electrode set