Phosphate Filter PO4-X-300: 4.0-18.2 m3 aquariums

Product no.: PO4-X-300

In stock
Delivery period: 10-20 working days

from 2,161.52 €

Price incl. VAT, plus delivery

Model size

Ask question

Phosphate filter d300 filled with high-end phosphate adsorber phosphate adsorber for easy reduction of too high phsophate concentrations

This simple filter can be equipped with different sieves and connections. Additional valves (drain, vent) and a measuring chain connection (also retrofitted) can also be added.

Possible applications of the AquaCare filter:

This filter is optimally operated in the fluidized bed process.

Features of the AquaCare phosphate filter:

suitable for different materials
Effective retention of the filter material by drain sieve
Fluidized bed filter insert with baffle plate
and of course , made of German quality acrylic material

Installation of the phosphate filter:

in the filter sump
external (next to, below or above the aquarium)

Required accessories:

Water inlet with sufficient pressure (bypass from main aquarium pump or own pump)

The feed water from the aquarium is pumped into the system by means of a bypass of the main pump or an additional feed pump. The water flows from bottom to top through the filter. The phosphate is removed from the water and safely bound by the adsorber.

If the phosphate concentration falls below 0.05 mg/l PO4, the flow should be reduced. If it rises above 0.2 mg/l, please increase the flow rate. The maximum flow rate should not be exceeded, because otherwise the material accumulates on the upper sponge.

If the phosphate concentration in the aquarium rises again, the material must be replaced. - The material should be used in the filter without flushing.

Filter with lid and additional connections
Fluid bed insert with deflector plate
Filter screen 1 mm
Inlet ball valve with check valve
Drain screw fitting
Drain ball valve for 16/22 mm hoses
Silicone feet
1 filling high-end phosphate adsorber Phosphate-X-Globuli

Diameter: 300 mm
Reactor height: __ cm select the desired length
Useful volume: approx. __ Liter m³ select the desired length
maximum aquarium size: approx. __ m³ select the desired length
maximum flow: 860...1190 litres per hour
lower sieve: moving bed screen with deflector plate
upper sieve: 1 mm
Footprint: 515 x 400 mm
Closure: PA-wing screws
Materials: high quality PMMA (plexiglass), NBR, silicone
Weight: __ kg select the desired length
Inlet: PVC ball valve d40 + check valve
Outlet: PVC screw fitting d50
Drain connection: G1/2" drain valve for 16/22 hose
Lid connection: one G1/2" connection is available
Electrode connection in cover: prepared for electrode set