Phosphate filter PO4-X-70: for 220-580 l aquariums

Product no.: PO4-X-70

In stock
Delivery period: 2-3 working days

from 240.53 €

Price incl. VAT, plus delivery

Length

Ask question

Phosphate filter d70 filled with high-end phosphate adsorber for easy reduction of too high phsophate concentrations

This simple filter can be equipped with different sieves and connections. Additional valves (drain, vent) as well as an electrode connection (also retrofitted) can also be added.

Field of operation of the AquaCare Empty Filter:

this filter is optimally operated in the fluidized bed process

Characteristics of the AquaCare Phosphate Filter:

suitable of a very large field of filter materials
effective retention of the filter material by inlet and outlet screen
and of course , made of German quality acrylic material

Erection of the Phosphate Filter:

in the filter sump
external (beside, under or over the aquarium)
hang-on (outside at the aquarium)
hang-in (inside of the filter sump)
wall mounting

Necessary accessories:

water inlet supply with enough pressure (bypass of a main pump of a small pump)

The feed water from the aquarium is pumped into the system by means of a bypass of the main pump or an additional feed pump. The water flows from bottom to top through the filter. The phosphate is removed from the water and safely bound by the adsorber.

If the phosphate concentration falls below 0.05 mg/l PO4, the flow should be reduced. If it rises above 0.2 mg/l, please increase the flow rate. The maximum flow rate should not be exceeded, because otherwise the material accumulates on the upper sponge.

If the phosphate concentration in the aquarium rises again, the material must be replaced. - The material should be used in the filter without flushing.

Filter with lid and additional connection 1/4" BSP
Moving bed screen with deflector plate
Filter screen 15 mm with filter sponge
Inlet ball valve with check valve
Outlet union
Additional connection in the base, e.g. can be used for a drain ball valve
Nozzle d12 for inlet and outlet
Silicone feet
1 filling High-End phosphate adsorber Phosphate-X-Globuli

Diameter: 70 mm
Reactor height: __ cm select the desired model size
Useful volume: approx. __ litres select the desired model size
maximum aquarium size: approx. __ litres select the desired length
maximum flow: 86...119 litres per hour
lower sieve: moving bed screen
upper sieve: 15 mm plus filter sponge
Footprint: 160 x 140 mm
Closure: PA-wing screws
Materials: high quality PMMA (acrylic glass), NBR, silicone, PA, PVC
Weight: __ kg select the desired model size
Inlet: PVC ball valve d20; a d12 hose nozzle is included in the delivery.
Outlet: ABS screw fitting d20; a d12 hose connector is included in the delivery
Drain connection: one G1/4" connections is available
Lid connection: one G1/4" connections is available
Electrode connection in cover: prepared for electrode set