These ultra-pure water filters are pressure-resistant and consist of a GRP (glass-fiber reinforced plastic) housing. Inside, the tank is equipped with a polyethylene liner to ensure watertightness. The filter is equipped with a closure at the top, a top nozzle and a nozzle rod for perfect flow through the resin. Filled with a high quality non-regenerated mixed bed resin, the ultrapure water filter is of the highest quality.
The ultrapure water filter is preferably connected downstream of a reverse osmosis system. (However, it can also be connected directly to a drinking water line - but then the capacity is approx. 20 times lower). The resin removes the remaining salt from the pure water of the reverse osmosis system and lowers the electrical conductivity to below 1 µS/cm. Silica that passes through the reverse osmosis system is also safely absorbed.
If the conductivity rises above approx. 3 µS/cm during operation, the resin should be replaced.
The filter is equipped with G3/4" female threads - do not forget to order the appropriate adapters.
Mounting note: Please note that the vessel must always stand on its base. High vessels should be fixed against falling over with a suitable pipe clamp. No great pressure must be applied to the container from the outside.
If the sizes offered here are not enough, we can provide containers up to 5600 liters on request.