Phosphate filter PO4-X-50: for 110 to 325 litres

Product no.: PO4-X-050

In stock
Delivery period: 2-3 working days

from 169.28 €

Price incl. VAT, plus delivery

Length

Ask question

The AquaCare PO₄-X- filter is the multifunctional filter MF2 with a filling of the high-performance adsorber Phosphate-X-Globuli.

safe binding of too high phosphate values in the aquarium
ideal in fluidized bed process
no release of dust or colours
easy to use
can reduce algae growth

The water flows from bottom to top through the filter. While the water flows past the granulate, it is freed of phosphate. The upward flow should be so strong that the particles move = fluidized bed process.

If you no longer need a PO₄-X filter, you can modify the filter for other applications -the necessary accessories can be found here.

The feed water from the aquarium is pumped into the system by means of a bypass of the main pump or an additional feed pump. The water flows from bottom to top through the filter. The phosphate is removed from the water and safely bound by the adsorber.

If the phosphate concentration falls below 0.05 mg/l PO4, the flow should be reduced. If it rises above 0.2 mg/l, please increase the flow rate. The maximum flow rate should not be exceeded, because otherwise the material accumulates on the upper sponge.

If the phosphate concentration in the aquarium rises again, the material must be replaced. - The material should be used in the filter without flushing.

Reactor with 5 mm screen and filter sponge for intake the filter material
cap with hybrid closing, filter sponge and screen
internal, removable screen for very fine filter materials in fluidized bed or vertical flow mode
8 mm PA fittings with nozzles (other connectors are available: ellbow fittings, push-fit fittings, PVC fittings, Eheim connectors; ozone resistant connectors are available, too)
central tube with deflector for vertical-flow-operation (VFF = Vertical Flow Filter)
silicone feed for a stable stand on smooth surfaces
international mounting and operation manual
high-performance phosphate adsorber PO4-X globules

diameter: 50 mm
total height: __ cm please select the desired length (other heights on request: choose the product "surcharge special lenghts")
useable volume: approx. __ liters please select the desired length
foot print size: 150 x 100 mm
bottom strainer: 2 mm, demountable
cap strainer: about d11 mm with filter sponge; others are available
hybrid closure: magnetic (without screws) for low pressure operation; screws for higher pressure are scope of delivery
Main tube: rotatable in 90° steps
materials: PMMA (acrylic glass), NBR rubber, silicone rubber, PA
weight: __ kg please select the desired length
connectors: 1/4" BSP female threads with 8 mm PA fittings
connector for drain: a 1/4" BSP drain valve is mountable

Tutorial (modus: fluidized bed filter)

Tutorial (function: +Globuli in vertical flow filter)

Leaflet

Instruction manual MF2-50

Check List

Bracket for hang-on installation: mf2-050-halter

Wall bracket: mf2-clip-set

Cap (cap with magnets, screws): MF2-50cap

Filter sponge: 313-15

Screen for filter sponge: MF2-50-sieb

Bottom screen with 3 mm holes: MF2-50-d3

Bottom screen with 5 mm holes: MF2-50-d5

Insert for reverse vertical flow filter: MF2-050-RVFF

Insert for reverse moving bed + trickling filter: MF2-050-trick

Central tube with deflector: MF2-050-ZR16

1/4" closure for auxiliary connector: cap-1/4

O-Ring for cap: 054x4N

O-Ring between basis and main tube: 18x3.5N

PA screws for cap screens: SK-M06x30-PA

PA screw for fixing the main tube to the base: SK-M04x25-PA

PA wing screws: FK-M06-20PA

Silicone feet: FR2000.19

Stainless steel stick for pulling out of the screens: MF2-stab

Connector with nozzle: PA R1/4"-8 mm

This filter does not belong in the hands of small children - danger of swallowing small parts!

The filter is equipped with strong magnets - be careful with handling (risk of crushing). People with cardiac pacemakers should be particularly careful with the filter.