Biopellet filter POC75: for 600 litres aquaria

Product no.: POC-75

Ask question

This product is no longer manufactured. Spare parts can still be ordered at any time.
The current replacement type is: POC70.

Biopellet filter d75 filled with POC+Globuli for easy removal of nitrate/nitrogen (N) and phosphate/phosphor (P).

nitrate and phosphate removal without control technology
produces bacterioplankton
simple and safe to use

Field of operation of the AquaCare Filter:

this filter is optimally operated in the fluidized bed process

Characteristics of the AquaCare Biopellet Filter:

suitable of a very large field of filter materials
effective retention of the filter material by inlet and outlet screen
filled with biopellets, which can be operated perfectly maintenance-free in a fluidized bed
and of course , made of German quality PVC material

Erection of the Biopellet Filter:

in the filter sump
external (beside, under or over the aquarium)
wall mounting

Necessary accessories:

water inlet supply with enough pressure (bypass of a main pump of a small pump)

Additional product information

fineness

4 mm

The water flows through the filter from bottom to top by means of a bypass of the main pump or an additional feed pump - optimally in the fluidized bed process.

The filter material POC+Globuli degrades completely within a few months and only needs to be refilled when the performance decreases. Choosing the right size is not easy, because the amount of POC+Globuli required depends very much on the nitrate formation rate of the aquarium. The filters may be oversized - if the nitrate and phosphate concentrations drop too low, part of the filter material can be removed and stored for future use.

Filter with lid
inlet ball valve
outlet union
Nozzles d16 for inlet and outlet
1 filling AquaCare POC+Globuli

Diameter: 75 mm
Reactor height: 45 cm
Useful volume: approx. 1.2 litres
maximum aquarium size: ca. 600 litres
minimum inlet for the fluidized bed: approx. 55 litres per hour
lower sieve: 0,5 mm slots
upper sieve: 0,5 mm slots
Footprint: 190 x 140 mm
Closure: PA-wing screws
Materials: high quality PVC, NBR, silicone, PA
Weight: 1.3 kg
Inlet: PVC ball valve d20; a d16 hose nozzle is included in the delivery.
Outlet: ABS screw fitting d20; a d16 hose connector is included in the delivery

Instruction manual

Leaflet POC filter

Check List Nitrate

Check List Phosphate

upper red screen (please ask us for the lower one)

wing screw M6x20

spare cap made of PVC

connector for PVC ball valve d20

connector for PVC/ABS union d20

o-ring for cap 77 x 4

This filter does not belong in the hands of small children - danger of swallowing small parts!