These activated carbon filters are pressure-resistant and consist of a GRP housing (glass-fibre reinforced plastic). From the inside, the container is equipped with a polyethylene liner to ensure watertightness. The filter is equipped with a cap at the top, a top nozzle and a nozzle rod for perfect flow through the filter bed. The filter is filled with a high-quality activated carbon in pellet form.
The activated carbon filter is preferably connected in front of a reverse osmosis system. (However, it can also be connected directly to a drinking water pipe - in this case, however, trace substances can only be reliably removed at a considerably lower flow rate).
The activated carbon filling should be replaced every year. The inflowing water must only have a low particle load. Otherwise, the surface of the activated carbon will become soiled and ineffective. If the inflow water is rich in particles, a sediment filter should be installed upstream.
The filter is equipped with G3/4" female threads - do not forget to order the appropriate adapters.
Installation note: Please note that the container must always stand on its base. High tanks should be fixed with a suitable pipe clamp to prevent them from falling over. No great pressure should be exerted on the container from the outside.
If the sizes offered here are not sufficient, we can offer containers up to 5600 litres on request. Automatically flushed systems are also available.