In stock
Delivery period: 2-3 working days
Biopellet filter d150 filled with POC+Globuli for easy removal of nitrate/nitrogen (N) and phosphate/phosphor (P).
This simple filter can be equipped with different sieves and connections. Additional valves (drain, vent) as well as an electrode connection (also retrofitted) can also be added.
Field of operation of the AquaCare Filter:
Characteristics of the AquaCare Biopellet Filter:
Erection of the Biopellet Filter:
Necessary accessories:
The water flows through the filter from bottom to top by means of a bypass of the main pump or an additional feed pump - optimally in the fluidized bed process. Alternatively, the simple upstream process (less water inflow) can also be used; in this case, however, regular rinsing is required. For this purpose, the inlet is increased considerably for a short time or additionally flushed with air - the drain connection can be used for the air supply.
The filter material POC+Globuli degrades completely within a few months and only needs to be refilled when the performance decreases. Choosing the right size is not easy, because the amount of POC+Globuli required depends very much on the nitrate formation rate of the aquarium. The filters may be oversized - if the nitrate and phosphate concentrations drop too low, part of the filter material can be removed and stored for future use.
Diameter: 150 mm
Reactor height: __ cm select the desired model size
Useful volume: approx. __ litres select the desired model size
Useful volume for fluidized bed: approx. ___ litres select the desired model size
maximum aquarium size: ca. __ litres select the desired model size
minimum inlet for the fluidized bed: approx. 240 litres per hour
lower sieve: fluidized bed sieve with deflector plate
upper sieve: 4 mm
Footprint: 310 x 220 mm
Closure: PA-wing screws
Materials: high quality PMMA (acrylic glass), NBR, silicone, PA
Weight: __ kg select the desired model size
Inlet: PVC ball valve d25; a d25 hose nozzle is included in the delivery.
Outlet: ABS screw fitting d25; a d25 hose connector is included in the delivery
Drain connection: G1/4" drain valve for 6/4 hose
Lid connection: one G1/2" connection is available
Electrode connection in cover: prepared for electrode set
Lower insert with deflector plate
O-ring for main flange 160 x 4
O-ring cord for main flange, outer groove d4 (a length of 660 mm is required)
O-ring for screen flange bottom 132 x 3
O-ring for screen flange top 100 x 4
PA slit screw for bottom main flange, M8x25
PA slit screw for sieves, M6 x 20
Drain valve / aeration valve G1/4"-6
1/2" closure for auxiliary connector: cap-1/2
Product | Note | Status | Price | |
---|---|---|---|---|
|
wall bracket for the filter (recommended for long filters) |
|
26.99 € / set(s) * | |
|
other connections can be selected here |
|
from 9.51 € * | |
|
other connections can be selected here |
|
from 8.28 € * | |
|
if the drain valve is used for air flushing, this transition fitting on soft hose is useful |
|
4.52 € * | |
|
if an electrode (pH or ORP) is to be installed, this set is required. |
|
10.74 € * | |
|
for the construction of a compact filter-pump unit |
|
42.20 € * | |
|
for the construction of a compact filter-pump unit |
|
47.29 € * | |
*
Display accessory details
Prices incl. VAT, plus delivery
|