Smart Filter 200: CO2 adsorber for nano aquaria

Product no.: smart-200-CO2

In stock
Delivery period: 2-3 working days

30.68 €

Price incl. VAT, plus delivery

Delivery weight: 0.6 kg

Ask question

The AquaCare CO₂ Adsorber Filter is the Smart Filter 200 with a filling of CO₂-X-Globuli ("breathing lime"). It removes carbon dioxide from the supply air to the skimmer.

The supply air is passed through the filter and flows through the CO₂-X globules. These remove the carbon dioxide and no longer lead to the formation of carbonic acid in the skimmer, which lowers the pH value. The pH value in the aquarium water rises slightly. If the filter material is used up, it turns slighty violet and must be replaced with new CO₂-X globules. The material must be replaced even after subsequent decolouration!

If you no longer need an adsorber filter, you can fill the filter with other filter materials.

The filter can be screwed on from both sides and is equipped with fine filter sponges. Two wall clips are included to attach the Smart Filter to a wall.

Please select the desired fittings below in the accessories.

transparent filter housing with screw caps
2 filter sponges
2 wall brackets
2 wall plugs
2 stainless steel screws 4,2 x 38
1 filling CO₂-X-Globuli (breathing lime)

Aquarium size: maximum 100 litres
pH value increase: approx. 0,3
Outer diameter: 50 mm
Inner diameter: 38 mm
Total length: 260 mm
Useful volume: 190 ml (0.19 l)
Thread connection: 1/4" internal thread
Installation position: preferably vertical (in case of horizontal installation the filter material must be tamped a little bit)
materials: Acrylonitrile styrene (AS, SAN), polypropylene (PP), silicone
Maximum allowable pressure: 6 bar
Weight: 440 g

Maximum gas flow rate:
- 450 l/h with 4 mm hoses (inner diameter)
- 1900 l/h with 8 mm hoses (inner diameter)
- 2900 l/h with 10 mm hoses (inner diameter)
- 4000 l/h with 12 mm hoses (inner diameter)

Filter material: AquaCare CO₂-X-Globuli (further information can be found here)

Leaflet

wall clip 50 mm (2")

o-ring 40 x 2.5

This filter does not belong in the hands of small children - danger of swallowing small parts!

Risk of swallowing the filter material

If the skimmer is operated with an air dryer and ozone unit, the sequence of the filter stages must be strictly adhered to:

- outside air
- AquaCare CO₂ adsorber
- air dryer (e.g. AquaCare LTM)
- ozone generator (e.g. AquaCare ozone generator)
- skimmer (e.g. AquaCare ACF)

This filter material should never come into contact with the aquarium water. Make sure that it is impossible for water to flow back into the CO₂-X globules filter.

Notes for the filter material:

corrosive:
Causes skin irritation
Causes severe eye damage
Must not be placed in the hands of children
Read the label before use
Do not breathe dust/fumes/gas/mist/vapour/spray
Wear protective gloves/protective clothing/eye protection/face protection
If swallowed: Rinse mouth. Do not induce vomiting
In case of contact with skin: Wash with plenty of water
In case of contact with eyes: Gently rinse with water for several minutes. If possible, remove any contact lenses. Continue rinsing.
Protect from sunlight.
Store at temperatures not exceeding 50°C.