GRP tank with PE liner, not filled. It can be filled with a wide variety of filter materials to remove or add substances. 

Auxiliary switch box for controlling 230 V motors. The auxiliary switch is switched with 24 VDC, i.e. a BasiTech WLAN output.

2 m cable with M8 plug and connection for solenoid valves with wide connection (EN 175301-803 / DIN 43650-A PG9).

Bridge plug for BasiTech WLAN devices to bypass the emergency stop function. Alternatively, a normally closed contact can be connected. 

100-240 V 50/60 Hz transformer with 24 V DC and 1.2 A with DC plug for BasiTech WLAN components

Extension cable for DC power supply BasiTech WLAN components, DC5521 plug and socket. 2 metres.

With this controler a small reverse osmosis unit is automated: refill a tank and flushing function.

Reducing fitting male thread to female thread made of brass. The fittings can be sealed with Teflon tape. 

Seawater-proof, adjustable energy-saving pump with controller. Ideal as a return pump or for individual filters.

Skimmer ACF3000N with needle wheel pump, for max. 3000 litres sea water tanks, suitable for ozone operation. Used.

Leakage sensor for detecting puddles on floors. As soon as it stands in a puddle of water, the contact switches.

Skimmer ACF170.000V with injector, for max. 170 m³ sea water tanks, without pump, best suitable for ozone operation.

2 stage Reverse Osmosis Unit Excel 480 with a daily flow of 480 litres at 15°C, 4 bar pressure and 500 mg/l TDS.

Reduces the noise that injectors cause. The silencer is mounted by means of a clip. We recommend silicone hoses for this purpose.

High-performance lime water reactor system with robust circulation pump for intensive mixing of the lime milk.

Potassium plays an extremely important role in the ion balance of all living organisms, from simple bacteria to mammals.

Zeolite filter with the diameter 150 mm made of crystal clear acrylic glass (PMMA) for the zeolite method.

Strontium has similar chemical properties to calcium and is therefore incorporated together in bones and coral skeletons.

Hanger bolt with metric male thread. The hanger bolt is fastened in wood directly or in stone with a wall plug.

TDS = total dissolved solids is a measure of the dissolved salt content of water. This parameter is usually measured via the conductivity.

Test tube holder for Hanna photometer type "Checker" or "Ion Specific Meter" or all test tubes with diameter 18.6 mm.

GRP (glass fiber reinforced plastic) tank with PE liner, filled with high performance solid demineralizer - safely removes traces of silica.

Reactor with diameter 100 mm made of clear acrylic glass (PMMA) for different filter materials

Powder funnel for easy filling of liquid and solid substances into narrow openings - ideal for the Turbo Chalk Reactor.

Empty Filter 400 in two sizes with removable screens - the screens are available in different filter sizes.

Interface cable 0-10V for Royal Exklusiv pump type RedDragon 5 to GHL units, 0.5 m, 3.5 mm jack plug to RJ-12 (RJ-25).

Seawater compatible sensor cable for Schego temperature control unit. The cable is 5 m long. 

BasiTech^TM support made of PMMA (acrylic glass) for one heater with the diameter of d26 mm on a 20 mm tube.

BasiTech^TM support made of PMMA (acrylic glass) for one measuring chain d12 on a 20 mm tube.

Tank for refill water (reverse osmosis water) and seawater for the supply of marine aquariums. Made to measure according to customer requirements. 

Refugium for the settlement of a rich microfauna and for the improvement of the water quality of a seawater aquarium

This special ball valve is a spare part for the Artemia column. In the closed state the column is ventilated.

Gas filter for pressure applications with protection tube. It is suitable for the removal of humidity, CO2 or pollutants (activated carbon).

Basic filter basin with sock filter, MediaCup, heater, skimmer, air pump, degassing stage, refill valve, care set.

The Basic 70 filter tank is suitable for marine aquariums up to approx. 300 liters. It consists of an acrylic glass basin with technique.

Basic filter basin with sock filter, MediaCup, heater, skimmer, air pump, degassing stage, refill valve, care set.

Basic filter basin with sock filter, MediaCup, heater, skimmer, air pump, degassing stage, refill valve, care set.

Basic 210: Filter basin made of high-quality acrylic glass for aquariums with a volume of approx. 1000 litres.

Zeolite filter removes ammonia and forms healthy bacterial flora, which can be used as bacterioplankton. 

Coarse zeolite material for all zeolite filters. - The filter should be rinsed daily to remove old bacterial lawns. 

Basic filter basin with sock filter, MediaCup, heater, skimmer, air pump, degassing stage, empty filter, refill valve, care set.

MediaCup for Basic filter system. A wide variety of filter materials can be filled into this cup.

MediaCup for Basic filter system. A wide variety of filter materials can be filled into this cup.

MediaCup with diameter d50 mm without accessories. It can be filled with a wide variety of filter materials. 

Acrylic glass holder for MediaCup with the diameter d50 mm. It is designed for the AquaCare MediaCup90. 

Water supply holder for all AquaCare MediaCups. It is supplied with a wing screw for mounting. 

Temperature controller for heating systems up to 2000 W (not suitable for inductive loads!)

Phosphate filter d70 filled with high-end phosphate adsorber for easy reduction of too high phsophate concentrations.

Biopellet filter d70 filled with POC+Globuli for easy removal of nitrate/nitrogen (N) and phosphate/phosphor (P).

KWR 70: high efficiency lime water reactor for sea water aquaria up to about 900 litres. Safe addition of calcium.

The NF70 is filled with a pure calcium carbonate granulate and raises the pH value of the passing water

The air dryer module LTM removes the air humidity from the intake air of an ozone unit and thus increases the skimmer performance.

PVC fitting made of PVC-U for glueing PVC tubes for creating a perfect water supply for your aquarium:
Type: bushing

Base for multi-function filter MF2-50, all lengths - please assemble main tube, suction feet, caps, O-ring and valves.

Empty filter with diameter 70 mm made of clear acrylic glass (PMMA) for raising the ORP (redox)

This nitrate filter is the Smart-Filter 200 with a nitrate resin filling. It removes surplus nitrate from freshwater aquariums. 

Disposable fine filter for reverse osmosis system, filter fineness 5 µm. If this inline filter is dirty, it must be completely replaced.

Skimmer ACF2000A-130 with air wood, for max. 2000 liters seawater aquarium, without pump, suitable for ozone operation.

This AquaCare LTM is the Smart-Filter 200 with a filling of H₂O-X globules. In front of an ozone device, it increases the performance.

Phytoplankton tube made of PMMA hybrid closure, hose connectors and internal silicone hoses.

Surcharge for a flushing system for skimmer pots up to maximum ACF3000 consisting of a time-controlled solenoid valve and flushing nozzles.

Turbo Chalk Reactor size 7 incl. Mini PLC for effective application of dissolved lime for large aquariums up to approx. 50 m³. 

4 pieces of replacement filters for air pump (aerator) Schego optimal and WS2. Filters should be changed every year. - Original spare part.

2 pieces suction cup holder for all Schego titanium heaters. Thus, the titanium heater can be securely attached to an aquarium pane. 

The AquaCare phosphate filter is the Smart-Filter 200 with a filling of standard phosphate adsorber.

The Smart Filter is an individually applicable empty filter that can be filled with a wide variety of materials. 

Titanium aquarium heater with short overall length, particularly suitable for low technical tanks.

Flow restrictor for reverse osmosis systems: herewith the waste water quantity of a reverse osmosis unit is determined.

Wastewater connection for reverse osmosis systems: this allows directing the concentrate of the system into a PVC pipe. 

Reverse osmosis system with 360 liters daily capacity. With pressure pump - a power connection is required. 

Reverse osmosis system with 180 liters daily capacity. With pressure pump - a power connection is required. 

Reverse osmosis system with 200 liters daily capacity. With pressure pump - a power connection is required. 

CoralTray bottom pod for gluing to glass or plastic floors (not PE or PP): prevents floating away in strong currents. 

The magnesium stage for Turbo Chalk Reactors can simply be placed behind the sediment stage. It is filled with magnesium granules.

The AquaCare Ozone Reactor OZR is the multifunctional filter MF₂ with an insert for ozone enrichment.

Filter insert filled with antiscaling balls to reduce calcification of reverse osmosis membranes. 

Autotrophic nitrate reactor (sulphur nitrate reactor) consisting of acrylic glass housing, sieves, circulation pump and sulphur filling. 

PVC fitting made of PVC-U for glueing PVC tubes for creating a perfect water supply for your aquarium:
Type: union nut and flow meter

Squeezing ring for Serto fittings made of PVDF - is pushed between hose / pipe and fitting and seals the system.

Slide ring to connect PVC screw nuts with a PVC threaded pipe. Made of white PP (polypropylene). 

Automatic flushing valve for small R.O. units up to approx. 1000 l/d. It is rinsed every 30 minutes for approx. 30 seconds. 

Skimmer ACF30.000V with injector, for max. 30 m³ sea water tanks, without pump, best suitable for ozone operation.