Energy saving pump aquabee UP11000e

• Pumpe with base plate
• 2 x tube adapter for glueing stickable tubes (PVC, ABS) and for hoses
• strainer
• 130 W controller
• power adapter
• electronical run-dry protection

Pumpe:
Performance 100 W: maximum 11,000 l/h, maximum 7.5 m
Performance 80 W: maximum 9,800 l/h, maximum 7.0 m
Performance 40 W: maximum 7,800 l/h, maximum 4.0 m
Electrical connection: 24 VDC
Power input: max. 100 W
Dry run protection function: yes
Dimensions without connectors (L x W x H): 160 x 115 x 150 mm
Connector cable:  3 m (up to 10 m on request)
Hose connectors (inner diameter): 40 mm
Bearing axis/sleeve: polished ceramics / ceramics
Water touched materials: ABS (you can glue it with PVC glue), silicone rubber, NBR rubber, ceramic

Controller:
Power input: 24 VDC, 100 W
Dimensions (L x W x H):  167 x 110 x 36 mm
Adjustment range: 0 to 100 W in 5 W steps
Programms: external (0-10 V interface)

Power adapter:
Type: electronical
Connection: 100-230 V, 50/60 Hz, 2.0 A
Output: 24 VDC, max. 6.67 A (160 VA)
Dimensions (L x W x H): 175 x 75 x 35 mm
Length of cable: 1.8 m

WEEE-Reg.-No.: DE83382024

Leaflet

Instruction manual DE, GB

Spare controller: FR11000.21
Spare transformer:
Impeller: FR5000.14
Pump housing: FR11000.16
Union nut for housing: FR11000.10
O-Ring pump housing: FR11000.15
Stand: FR11000.20
Tube connector d40: FR11000.17
Union nut for tube connector: FR11000.18
O-Ring for tube connector: FR11000.19
Intake strainer: FR11000.22

The pump is not suitable for outdoor operation.
Operate the pump only with an earth-leakage circuit breaker < 30 mA.
Do not change or replace the mains cable. Remove  mains cable from socket before doing maintenance or cleaning.
Do not bend the cable and do not fix the pump at the cable.
In case of defect mains cable never use the pump - danger to life.