Skimmer ACF170.000V with injector, for max. 170 m³ sea water tanks, without pump, best suitable for ozone operation.

2 stage Reverse Osmosis Unit Excel 480 with a daily flow of 480 litres at 15°C, 4 bar pressure and 500 mg/l TDS.

Reduces the noise that injectors cause. The silencer is mounted by means of a clip. We recommend silicone hoses for this purpose.

High-performance lime water reactor system with robust circulation pump for intensive mixing of the lime milk.

Potassium plays an extremely important role in the ion balance of all living organisms, from simple bacteria to mammals.

Zeolite filter with the diameter 150 mm made of crystal clear acrylic glass (PMMA) for the zeolite method.

Strontium has similar chemical properties to calcium and is therefore incorporated together in bones and coral skeletons.

Hanger bolt with metric male thread. The hanger bolt is fastened in wood directly or in stone with a wall plug.

TDS = total dissolved solids is a measure of the dissolved salt content of water. This parameter is usually measured via the conductivity.

BasiTech^TM support on a 20 mm tube made of PMMA (acrylic glass) with one G1/4" hole - for fastening of hose nozzles.

Reactor with diameter 70 mm made of clear acrylic glass (PMMA) for different filter materials

Reactor with diameter 150 mm made of clear acrylic glass (PMMA) for different filter materials

Replacement board for pump protection, Turbo Chalk Reactor and automatic refill systemcontrol - the replacement may only be carried out by qualified personnel.

Interface cable 0-10V for aquabee pump to GHL units, 2 m, 3.2 mm cinch plug to RJ-12 (RJ-25).

Seawater compatible sensor cable for Schego temperature control unit. The cable is 2 m long. 

Autotrophic nitrate reactor (sulphur nitrate reactor) consisting of acrylic glass housing, sieves, circulation pump and sulphur filling. 

BasiTech^TM support made of PMMA (acrylic glass) for one heater with the diameter of d22 mm on a 20 mm tube.

BasiTech^TM support made of PMMA (acrylic glass) for two measuring chains d12 on a 20 mm tube.

Turbo Chalk Reactor size 2: high efficiency lime reactor for sea water aquaria up to about 1000 litres.

Professional holder with three Artemia columns. The holder is screwed to a vertical wall with screws. 

Professional Artemia column made of PVC with approx. 8 liters volume, equipped with special ball valve for drainage and aeration. 

Flow measuring cell for four standard sensors with 12 mm diameter. High-quality workmanship from German production. 

Basic filter basin with sock filter, MediaCup, heater, skimmer, air pump, degassing stage, refill valve, care set.

Basic filter basin with sock filter, MediaCup, heater, skimmer, air pump, degassing stage, refill valve, care set.

Basic filter basin with sock filter, MediaCup, heater, skimmer, air pump, degassing stage, refill valve, care set.

Basic 140: Filter basin made of high-quality acrylic glass for aquariums with a volume of approx. 600 litres.

Basic 320: Filter basin made of high-quality acrylic glass for aquariums with a volume of approx. 1300 litres.

Zeolite filter removes ammonia and forms healthy bacterial flora, which can be used as bacterioplankton. 

Hose holder for Basic system: the holder can be screwed into any position in the 3rd filter chamber. Ideal for dosing pumps. 

Basic 50: Filter basin made of high-quality acrylic glass for aquariums with a volume of approx. 200 litres.

MediaCup for Basic filter system. A wide variety of filter materials can be filled into this cup.

MediaCup with diameter d90 mm without accessories. It can be filled with a wide variety of filter materials. 

Acrylic glass holder for MediaCup with the diameter d90 mm. It is designed for the AquaCare MediaCup90. 

Acrylic glass holder for 2 x MediaCup with the diameter d50 mm. It is designed for the AquaCare MediaCup90. 

Mini ball valve made of brass, chrome plated, connections 1/8 "i-1/8 "i, 0...10 bar, flow rate fixed for RO units.

Air diffuser made of polyethylene (PE) for large air volumes. For Turbo Chalk Reactor size 5. 1/2" female thread connection.

Empty filter with diameter 70 mm made of clear acrylic glass (PMMA) for different filter materials

Phosphate filter d70 filled with standard adsorber for easy reduction of too high phsophate concentrations.

Autotrophic nitrate reactor (sulphur nitrate reactor) for the reduction of nitrate - no additional C-source is required.

Trickle filter d70 filled with AquaCare trickle filter material made of PE for aquariums which are operated without skimmer.

The CO₂ adsorber removes the carbon dioxide from the supply air of a skimmer and thus raises the pH value of the aquarium water.

Activated carbon filter d100 filled with high-performance activated carbon pellets for easy removal of yellow substances, etc.

Additional connection on the main tube - can only be ordered with a new AquaCare filter. For old filters please ask.

Air flow meter set for Turbo Chalk Reactor size 4-5 consisting of flow meter, brackets, fittings and screws.

This mixed bed filter is the AquaCare Smart-Filter 200 with a filling of ultrapure water resin - it removes residual salts and silica. 

Disposable activated carbon filter for reverse osmosis system. If this inline filter is dirty, it must be completely replaced.

Skimmer ACF2000V-130 with injector, for max. 2000 liters seawater aquarium, without pump, suitable for ozone operation.

Suitable adapter for air compressors Medo size 1.6 to size 4,8 (1600 to 4800 l/h) to PA nozzle.

Turbo Chalk Reactor size 4: high efficiency lime reactor for sea water aquaria up to about 8000 litres.

PMMA lid for MF2 filter, with embedded magnets, extra connection (1/4" internal thread), with O-ring for plankton breeding.

Turbo Chalk Reactor size 7 incl. Mini PLC for effective application of dissolved lime for large aquariums up to approx. 50 m³. 

4 pieces of replacement filters for air pump (aerator) Schego optimal and WS2. Filters should be changed every year. - Original spare part.

2 pieces suction cup holder for all Schego titanium heaters. Thus, the titanium heater can be securely attached to an aquarium pane. 

The AquaCare phosphate filter is the Smart-Filter 200 with a filling of standard phosphate adsorber.

The Smart Filter is an individually applicable empty filter that can be filled with a wide variety of materials. 

Titanium aquarium heater with short overall length, particularly suitable for low technical tanks.

Flow restrictor for reverse osmosis systems: herewith the waste water quantity of a reverse osmosis unit is determined.

Wastewater connection for reverse osmosis systems: this allows directing the concentrate of the system into a PVC pipe. 

Reverse osmosis system with 360 liters daily capacity. With pressure pump - a power connection is required. 

Reverse osmosis system with 180 liters daily capacity. With pressure pump - a power connection is required. 

Reverse osmosis system with 200 liters daily capacity. With pressure pump - a power connection is required. 

CoralTray bottom pod for gluing to glass or plastic floors (not PE or PP): prevents floating away in strong currents. 

The magnesium stage for Turbo Chalk Reactors can simply be placed behind the sediment stage. It is filled with magnesium granules.

The AquaCare Ozone Reactor OZR is the multifunctional filter MF₂ with an insert for ozone enrichment.

Filter insert filled with antiscaling balls to reduce calcification of reverse osmosis membranes. 

Autotrophic nitrate reactor (sulphur nitrate reactor) consisting of acrylic glass housing, sieves, circulation pump and sulphur filling. 

PVC fitting made of PVC-U for glueing PVC tubes for creating a perfect water supply for your aquarium:
Type: union nut and flow meter

Squeezing ring for Serto fittings made of PVDF - is pushed between hose / pipe and fitting and seals the system.

Slide ring to connect PVC screw nuts with a PVC threaded pipe. Made of white PP (polypropylene). 

KWR 250: high efficiency lime water reactor for sea water aquaria up to about 7000 litres. Safe addition of calcium.

Skimmer ACF2000V-130 with Venturi (Injector), for max. 2000 litres sea water tanks, without pump, suitable for ozone operation.

Flow meter made of PA with float for air - Measuring range 2 to 21 m³/h - Connection PVC adhesive sleeve d20

Skimmer ACF50.000V with injector, for max. 50 m³ sea water tanks, without pump, best suitable for ozone operation.

Directly driven solenoid valve made of brass, DN 2.5 - NC (normally closed), pressure range 0-30 bar

Replacement board for reverse osmosis control - the replacement may only be carried out by qualified personnel.

The CO₂ adsorber removes the carbon dioxide from the supply air of a skimmer and thus raises the pH value of the aquarium water.

Biopellet filter d300 filled with POC+Globuli for easy removal of nitrate/nitrogen (N) and phosphate/phosphor (P).

Empty filter with diameter 150 mm made of clear acrylic glass (PMMA) for different filter materials

Phosphate filter d150 filled with high-end phosphate adsorber phosphate adsorber for easy reduction of too high phosphate concentrations

Phosphate filter d150 filled with standard phosphate adsorber for easy reduction of too high phsophate concentrations

The ultrapure water filter is connected directly behind a reverse osmosis system and removes any remaining interfering substances.

Neutralization filters raise the pH value behind an ADN. Reverse osmosis water can be enriched with minerals.

Connector for PVC ball valve with diameter 25 - for all PMMA filter d150

Additional module for reverse osmosis system. Extends the capacity of a reverse osmosis unit.