Lime water reactor 400: for 28 to 68 m3 aquaria

Product no.: KWR400

Not in stock

Length

Ask question

High-performance lime water reactor system with robust circulation pump for intensive mixing of the lime milk. Due to the extremely high calcium hydroxide loading, operation for up to several months without maintenance is possible.

pH value is slightly increased Calcium concentration is increased Phosphate concentration is reduced

Advantages over other lime mixers:

intensive mixing ot the suspension
sharp separation between white lime milk and clear lime water
gas-tight system: no ageing of the lime milk possible
free outlet enables a safe operation: check valve or adjustment devices are installed at the inlet and will not scale
continuous or discontinuous operation
sizes for all aquaria available
extrem high load capacity of calcium hydroxide
refill intervals up to some months
and of course

Required accessories:

feed with reverse osmosis water or very soft water
a drop counter helps with the adjustment

A suspension (mixture) of water and powdery calcium hydroxide is kept in suspension in the reactor by means of a robust circulation pump. Above this white lime milk is the clear lime water. The incoming reverse osmosis water (or very soft water) reacts immediately in the KWR with the calcium hydroxide to lime water, which runs back into the aquarium or filter tank.

The aquarium water is enriched with calcium ions. Due to the very high pH value of lime water (pH12-13), the pH value of the aquarium is also slightly increased. At the point where the lime water drips into the aquarium water, precipitates (hydroxyapatite) are formed which carry phosphate with them. This reduces the phosphate concentration in the aquarium (phosphate precipitation).
The carbonate hardness is generally not increased.

Reactor with rigid circulation pump
Special screen for generating the suspension
Mounting and operation manual
1 filling calcium hydroxide powder, "purest" quality

Maximum aquarium size: ___ m³ (depending on the daily evaporation rate; oversizing the KWR prolongs the maintenance-free time) select the required size
Operation: external, in filter sump
Diameter: 400 mm
Volume: __ litres select the required size
Maximum continuous inlet volume flow: __ l/h select the required size
Footprint: 84 x 50 cm
Reactor height: __ cm select the required size
Materials: PMMA, PA, NBR, Silicone, PVC, ABS
Weight:__ kg select the required size
Built-in circulation pump: Eheim 1260
Electrical connection: 50 W, 230 V 50 Hz (others on request)
Supply water connection: 1/4" - 4 mm nozzle
Connection drain: 1/2" - 12 mm nozzle
Drain connection: G1/2" drain valve
maximum calcium hydroxide filling: __ kg select the required size
Quantity of lime water per calcium hydroxide filling at 25°C: __ m³ select the required size
pH value of the outlet water: 12 to 13
Calcium concentration outlet water: 720 mg/l (15°C), 690 mg/l (20°C), 670 mg/l (25°C)
WEEE Reg. No.: DE80560390

Instruction manual

Leaflet

Safety data sheet "Calcium Hydroxide"

Dosing "Kalkwasser"

Methods for rising KH and Calcium

Sodium hydrogen carbonate in the KWR

FAQ: Calcium hydroxide reactor - "kalkwasser" reactor

Calcium Hydroxide solution („Kalkwasser“) is a strong alkaline substance. Children should never reach the powder nor the solution. At contact with eyes or skin flush with much water and go to the doctor (take the label of the Calcium Hydroxide with you).