Supply voltage: 230 V, 50-60 Hz
Power consumption standby: 0.3 VA
Sensor cable length: 2 m
Measuring voltage: 5 V DC
Measuring range: -55 to 125°C
Measuring accuracy: +/- 0.5°C in the range from -10 to 85°C
Measuring accuracy: +/- 2.0°C in the range from -55 to -10°C and 85 to 125°C
Switching accuracy: 0.1 to 10.0°C (adjustable)
Switching capacity: maximum 2000 W (not inductive)
Display of actual temperature, minimum temperature and maximum temperature
Dimensions of the housing: 98 x 60 x 40 mm
Dimensions sensor: 30 x 9 mm
Weight: 190 g
Connection: Schuko plug (on housing)
Protection class Housing: Protection class I (for domestic use only)
Protection type housing: IP 20
Protection type sensor: IP 68
WEEE-Reg.-Nr.: DE55373019

Instruction manual DE, GB, FR, IT, ES, NL, RU

Silicone suction cup for the sensor cable

 Observe the safety instructions in the operating manual.

Footprint size: 135 x 90 mm
Holes for heaters: d 26
Suitable for e.g. Sera "delta heater" (long form), Sera (short form), Rena, Jäger (Eheim), Schego titanium heaters
Numbers of holes: 2
Thickness: 5 mm
Maximum immersion depth for standard Basic Basins (total height 400 mm): 330 mm
Material: PMMA (acrylic glass, Plexiglas)

Leaflet

Make sure that the heater is always in the water to at the minimum immersion depth. After disconnecting the mains plug, the heater should remain in the water for another 15 minutes before removing it. Keep away from children: Danger of burns!

Heaters should always only be operated via residual current switches (FI switch).

Material of filter tissue: polyamide (nylon)
Diameter of tissue: approx. 80 mm
Filtration rating: approx. 100 µm

Leaflet

Footprint size: 160 x 160 mm
Thickness: 15 mm
Material: PVC hard (PVC-U)

Leaflet

The heater must stay in the water minimum to the submersion depths all the time. The maximum water level should not exceed 50 mm under the heater head. Make sure that the heater will never be submerged totally.

Dimensions of the holder: 130 x 80 x 45 cm
Material: PVC-U
Material of screws: PA (polyamide) and SS (stainless steel)
Screws: 2 x M10, 4 x SS 4.8x13
Diameter for heater: 50 mm (others on request)
Maximum slice thickness: 14 mm (others on request)

Leaflet

The heater must stay in the water minimum to the submersion depths all the time. The maximum water level should not exceed 50 mm under the heater head. Make sure that the heater will never be submerged totally.

This article does not belong in the hands of small children - danger of small parts being swallowed!

Dimensions of the holder: 130 x 80 x 45 cm
Material: PVC-U
Material of screws: PA (polyamide) and SS (stainless steel)
Screws: 2 x M10, 4 x SS 4.8x13
Diameter for heater: 50 mm (others on request)
Maximum slice thickness: 14 mm (others on request)

Leaflet

The heater must stay in the water minimum to the submersion depths all the time. The maximum water level should not exceed 50 mm under the heater head. Make sure that the heater will never be submerged totally.

This article does not belong in the hands of small children - danger of small parts being swallowed!

Material: PMMA (acrylic glass, "Plexiglas")
Colour: red
Dimensions: 135 x 110 x 5 mm
diameter for the cup: 95 mm

Leaflet

Footprint size: 135 x 90 mm
Thickness: 5 mm
Holes: 4 x 12 mm (others on request)
Material: PMMA (acrylic glass, Plexiglas)

Leaflet

Footprint size: 135 x 90 mm
Thickness: 5 mm
Holes: 4 x 12 mm plus 1 x 26 mm (others on request)
Material: PMMA (acrylic glass, Plexiglas)

Leaflet

Footprint size: 135 x 90 mm
Material thickness: 5 mm
Material: PMMA (acrylic glass, plexiglass)
Material of filter tissue: polyamide (nylon)
Filtration rating: approx. 100 µm

Leaflet