CO2 adsorber d150: for 1400 to 3400 litres aquaria

• Filter with lid and additional connection 1/2" BSP
• inlet ball valve
• outlet union
• Nozzle d25 for connectors
• silicone feet

Diameter: 150 mm
Reactor height: __ cm  select the desired model size
Useful volume: approx. __ litres  select the desired model size
maximum aquarium size: ca. __ litres   select the desired model size
lower sieve: 4 mm
upper sieve: 4 mm
Footprint: 310 x 220 mm
Closure: PA-wing screws
Materials: high quality PMMA (acrylic glass), NBR, silicone, PA
Weight: __ kg select the desired model size
Inlet: PVC ball valve d25; a d25 hose nozzle is included in the delivery.
Outlet: ABS screw fitting d25; a d25 hose connector is included in the delivery
Drain connection: one G1/4" connection is available
Lid connection: one G1/4" connection is available
Electrode connection in cover: prepared for electrode set

Leaflet

Instruction manual PMMA filter 150

Saftety Data Sheet

Filter screens

Filter sponge

Spare lid

Main tube

O-ring for main flange 160 x 4

O-ring cord for main flange, outer groove d4 (a length of 660 mm is required)

O-ring for screen flange bottom 132 x 3

O-ring for screen flange top 100 x 4

PA Wing screw M8x25

PA washer d8,5

PA slit screw for bottom main flange, M8x25

PA slit screw for sieves, M6 x 20

Drain valve / aeration valve G1/4"-6

1/2" closure for auxiliary connector: cap-1/2

PU self-adhesive foot

Spare ball valve d25 (inlet)

Spare union (outlet)

connector for PVC ball valve d25

connector for PVC union d25

 This filter does not belong in the hands of small children - danger of swallowing small parts!

If the skimmer is operated with an air dryer and ozone unit, the sequence of the filter stages must be strictly adhered to:

- outside air
- AquaCare CO₂ adsorber
- air dryer (e.g. AquaCare LTM)
- ozone generator (e.g. AquaCare ozone generator)
- skimmer (e.g. AquaCare ACF)

 This filter material should never come into contact with the aquarium water. Make sure that it is impossible for water to flow back into the CO₂-X globules filter. 

Notes for the filter material:

corrosive:
Causes skin irritation
Causes severe eye damage
Must not be placed in the hands of children
Read the label before use
Do not breathe dust/fumes/gas/mist/vapour/spray
Wear protective gloves/protective clothing/eye protection/face protection
If swallowed: Rinse mouth. Do not induce vomiting
In case of contact with skin: Wash with plenty of water
In case of contact with eyes: Gently rinse with water for several minutes. If possible, remove any contact lenses. Continue rinsing.
Protect from sunlight.
Store at temperatures not exceeding 50°C.