CO2 adsorber d70: for 260-680 litres aquaria

• Filter with lid and additional connection 1/4" BSP
• inlet ball valve
• outlet union
• Additional connection in the base, e.g. can be used for a drain ball valve
• Nozzle d12 for inlet and outlet
• silicone suction feet

Diameter: 70 mm
Reactor height: __ cm  select the desired model size
Useful volume: approx. __ litres  select the desired model size
maximum aquarium size: ca. __ litres   select the desired model size
lower sieve: 4 mm
upper sieve: 4 mm
Footprint: 160 x 140 mm
Closure: PA-wing screws
Materials: high quality PMMA (acrylic glass), NBR, silicone, PA
Weight: __ kg select the desired model size
Inlet: PVC ball valve d20; a d12 hose nozzle is included in the delivery.
Outlet: ABS screw fitting d20; a d12 hose connector is included in the delivery
Drain connection: one G1/4" connection is available
Lid connection: one G1/4" connection is available
Electrode connection in cover: prepared for electrode set

Leaflet

Instruction manual PMMA filter 70

Saftety Data Sheet

Upper screen

Lower scree with central tube

Spare lid

O-ring for main flange 77 x 4

Wing screw M6x20

PA washer d6.5

Drain valve / aeration valve G1/4"-6

1/4" closure for auxiliary connector: cap-1/4

Silicone suction feet

Spare ball valve d20 (inlet)

Spare union d20 (outlet)

connector for PVC ball valve d20

connector for PVC union d20

 This filter does not belong in the hands of small children - danger of swallowing small parts! 

If the skimmer is operated with an air dryer and ozone unit, the sequence of the filter stages must be strictly adhered to:

- outside air
- AquaCare CO₂ adsorber
- air dryer (e.g. AquaCare LTM)
- ozone generator (e.g. AquaCare ozone generator)
- skimmer (e.g. AquaCare ACF)

 This filter material should never come into contact with the aquarium water. Make sure that it is impossible for water to flow back into the CO₂-X globules filter. 

Notes for the filter material:

corrosive:
Causes skin irritation
Causes severe eye damage
Must not be placed in the hands of children
Read the label before use
Do not breathe dust/fumes/gas/mist/vapour/spray
Wear protective gloves/protective clothing/eye protection/face protection
If swallowed: Rinse mouth. Do not induce vomiting
In case of contact with skin: Wash with plenty of water
In case of contact with eyes: Gently rinse with water for several minutes. If possible, remove any contact lenses. Continue rinsing.
Protect from sunlight.
Store at temperatures not exceeding 50°C.