MediaCup for Basic filter system - d90 mm

MediaCup for Basic filter system and other filter devices. A wide variety of filter materials can be filled into this cup. Coarse materials can be filled directly, for fine materials up to approx. 5 mm a filter sponge is supplied. For very fine materials smaller than 5 mm we recommend the use of a filter stocking. 

This filter material cup can be installed in different ways:

1. It is simply hung on the lower bars of the Basic filter basin in the 1st chamber. The water supply is done with the incoming water to the Basic system.
2. The cup is hung on the upper bars of the Basic filter basin and a water inflow is established. With this method, a defined flow can be set if, for example, the concentration is to be lowered slowly and in a defined manner with phosphate removers.
3. The MediaCup is screwed onto the bar of the 3rd chamber of the Basic filter system at any position using the wing screws provided and supplied with water as in the previous method.
4. The MediaCup can be placed in any filter basin. Only an inlet must be designed. 

Please note that the MediaCup is 20 mm wider than the standard holders of the Basic system.