Ozone reactor OZR150: 44 to 100 m3 ponds

1. stage: in the upper section the feed water is mixed turbulently with ozone containing air. A small air pump should bring in air through the ozone generator into the OZR.
2. stage: within the trickling section the water flows over trickling filter material that realizes a good transit of the ozone into the water.
3. stage: in the water filled section of the OZR the smallest bubbles will stay for a long time in the tube and dissolves more ozone.  The outlet water may flow over an activated carbon filter to eliminate surplus ozone or may flow directly into the pool. With the second version the ORP should be controlled to avoid over concentrations that can harm organisms.

Use only pre-filtrated water: otherwise dirt and fibres get caught in the packing and causes more maintenance.

Take attention that the connected air pump will bear down all resistances: check valve(s), ozone generator, hoses, counterpressure of OZR and counter pressure of downstream installed filters, e.g. acitvated carbon.

The counter pressure depends on the choosen water flow (the more flow the higher the counter pressure in the OZR) and if the outlet ball valve is throttled: the higher the counter pressure in the OZR the more ozone will dissolve.

• Filter with lid and ozone connection 1/8" BSP made of PVDF
• necessary screens
• filter material made of PP
• outlet ball valve
• inlet union
• Drain ball valve for 6/4 hoses
• Nozzle d25 for inlet and outlet
• silicone feet

Necessary Accessories:

• feed water pump
• ozone supply (air pump, air dryer, ozone generator)
• check valve
• maybe ORP controller
• maybe a downstream activated carbon filter

Diameter: 150 mm
Maximum pond size: __ m³ (for intensive cultures much less; please contact AquaCare)  select the desired model size
Reactor height: __ cm select the desired model size
Useful volume: approx. __ litres select the desired model size
Maximum ozone demand: __ mg/h (only with downstream activated carbon filter and/or redox control)  select the desired model size
Water feed: 1.7 to 3.6 m³/h
Footprint: 310 x 220 mm
Closure: PA-wing screws
Materials: high quality PMMA (acrylic glass), NBR, silicone, PA
Weight: __ kg select the desired model size
Ozonanschluss: 6/4 hose
Outlet: PVC ball valve d25; a d25 hose nozzle is included in the delivery.
Inlet: ABS screw fitting d25; a d25 hose connector is included in the delivery
Drain connection: G1/4" drain valve for 6/4 hose
Lid connection: G1/8" fitting made of PVDF for 6/4 hose

Leaflet

Instruction manual OZR (acrylic glass version), INT

Upper screen 4 mm

Mid screen with cap

Lower screen with central tube  select the desired model size

Spare lid

Spare filter material

Main tube

O-ring for main flange 160 x 4

O-ring cord for main flange, outer groove d4 (a length of 660 mm is required)

O-ring for screen flange bottom 132 x 3

O-ring for screen flange top 100 x 4

PA Wing screw M8x25

PA washer d8,5

PA slit screw for bottom main flange, M8x25

PA slit screw for sieves, M6 x 20

Drain valve / aeration valve G1/4"-6

Ozone connector made of PVDF

PU self-adhesive foot

Spare ball valve (outlet)

Spare union (intlet)

connector for PVC ball valve d20

connector for PVC/ABS union d20

 This filter does not belong in the hands of small children - danger of swallowing small parts! 

  Ozone is a harmful substance and is to use in accordance with the manual of the ozone generator and local regulations only.