Phosphate filter PO4-70: for 220-580 l aquariums

The feed water from the aquarium is pumped into the system by means of a bypass of the main pump or an additional feed pump. The water flows from bottom to top through the filter. The phosphate is removed from the water and safely bound by the adsorber.

If the phosphate concentration falls below 0.05 mg/l PO4, the flow should be reduced. If it rises above 0.2 mg/l, please increase the flow rate. The maximum flow rate should not be exceeded, because otherwise the material accumulates on the upper sponge.

If the phosphate concentration in the aquarium rises again, the material must be replaced. - The material should be used in the filter without flushing. 

• Filter with lid and additional connection 1/4" BSP
• Each 2 x filter screen 15 mm with filter sponge
• Outlet union
• Additional connection in the base, e.g. can be used for a drain ball valve
• Nozzle d12 for inlet and outlet
• Silicone feet
• 1 filling standard phosphate adsorber

Diameter: 70 mm
Reactor height: __ cm select the desired model size
Useful volume: approx. __ litres select the desired model size
maximum aquarium size: approx. __ litres  select the desired length
maximum flow: 20 litres per hour
lower sieve: 15 mm plus filter sponge
upper sieve: 15 mm plus filter sponge
Footprint: 160 x 140 mm
Closure: PA-wing screws
Materials: high quality PMMA (acrylic glass), NBR, silicone, PA, PVC
Weight: __ kg select the desired model size
Inlet: PVC ball valve d20; a d12 hose nozzle is included in the delivery.
Outlet: ABS screw fitting d20; a d12 hose connector is included in the delivery
Drain connection: one G1/4" connections is available
Lid connection: one G1/4" connections is available
Electrode connection in cover: prepared for electrode set

Leaflet

Instruction manual PMMA filter 70

Instruction manual phosphate filter INT

Upper screen

Bottom screen with central tube

Spare lid

O-ring for main flange 77 x 4

Wing screw M6x20

PA washer d6.5

Drain valve / aeration valve G1/4"-6

1/4" closure for auxiliary connector: cap-1/4

Silicone suction feet

Spare ball valve d20 (inlet)

Spare union d20 (outlet)

connector for PVC ball valve d20

connector for PVC union d20

 This filter does not belong in the hands of small children - danger of swallowing small parts!