Zeolite filter d150: for 2690 - 6600 liters aquariums

The inlet water from the aquarium is pumped into the filter by means of the bypass of the main pump or an additional feed pump. The water flows through the filter from the bottom to the top. The pollutants can bind to the zeolite material and bacteria settle on the surface.

To prevent the filter from becoming clogged and reducing performance, the system should be flushed with air every day. An air pump connected to a timer pumps air into the filter for a few minutes, creating strong turbulence. This mechanical movement loosens excess bacteria, which is removed by the filter's drain.

For high nutrient aquariums: direct the drain from the filter to the suction side of the skimmer.

For low nutrient aquariums: direct the filter effluent directly to the suction side of the recirculation pump. Supplemental feeding with coral and/or bacteria supplements may be useful.

• Filter with lid and additional connection 1/2" BSP
• filter screen 8 mm
• inlet ball valve
• outlet union
• air distributor made of PE
• air connector 8 mm
• Nozzle d25 for inlet and outlet
• silicone feet
• 1 filling zeolite gravel

Diameter: 150 mm
Reactor height: __ cm select the desired model size
Useful volume: approx. __ litres select the desired model size
minimum flow: approx. 1200 liters per hour
maximum flow: approx. 2400 liters per hour
required air volume: approx. 480 liters per hour
lower and upper sieve: 8 mm
Footprint: 310 x 220 mm
Closure: PA-wing screws
Materials: high quality PMMA (acrylic glass), NBR, silicone, PA, PE
Weight: __ kg select the desired model size
Inlet: PVC ball valve d25; a d25 hose nozzle is included in the delivery.
Outlet: PVC union d25; a d25 hose connector is included in the delivery
Air flushing connection: 6 mm nozzle for air hose (others possible)
Lid connection: one G1/2" connections is available
Electrode connection in cover: prepared for electrode set

Leaflet

Instruction manual PMMA filter 150

Filter screens

Filter sponge

Spare lid

Main tube

O-ring for main flange 160 x 4

O-ring cord for main flange, outer groove d4 (a length of 660 mm is required)

O-ring for screen flange bottom 132 x 3

O-ring for screen flange top 100 x 4

PA Wing screw M8x25

PA washer d8,5

PA slit screw for bottom main flange, M8x25

PA slit screw for sieves, M6 x 20

Drain valve / aeration valve G1/4"-6

1/2" closure for auxiliary connector: cap-1/2

PU self-adhesive foot

Spare ball valve d25 (inlet)

Spare union (outlet)

connector for PVC ball valve d25

connector for PVC union d25

 This filter does not belong in the hands of small children - danger of swallowing small parts!