Zeolite Filter Zeo70: for 500-1300 litres aquaria

The inlet water from the aquarium is pumped into the filter by means of the bypass of the main pump or an additional feed pump. The water flows through the filter from the bottom to the top. The pollutants can bind to the zeolite material and bacteria settle on the surface.

To prevent the filter from becoming clogged and reducing performance, the system should be flushed with air every day. An air pump connected to a timer pumps air into the filter for a few minutes, creating strong turbulence. This mechanical movement loosens excess bacteria, which is removed by the filter's drain.

For high nutrient aquariums: direct the drain from the filter to the suction side of the skimmer.

For low nutrient aquariums: direct the filter drain directly to the suction side of the recirculation pump. Supplemental feeding of coral and/or bacterial products may be useful. 

• Filter with lid and additional connections
• Filter screen 8 mm
• inlet ball valve
• outlet union
• connector for air scouring
• Nozzles d16 for inlet and outlet
• silicone suction feet
• 1 filling AquaCare high-performance zeolite mineral

For the zeolite process you need additional:

• air pump
• check valve for air
• timer for the air pump
• air hose

Diameter: 70 mm
Reactor height: __ cm  select the desired model size
Useful volume: approx. __ litres  select the desired model size
Maximum aquarium size: approx. __ litres  select the desired model size
Minimum flow: approx. 250 litres per hour
Maximum flow: approx. 500 litres per hour
Required air volume: approx. 100 litres per hour
Lower and upper sieve: 8 mm
Footprint: 160 x 140 mm
Closure: PA-wing screws
Materials: high quality PMMA (acrylic glass), NBR, silicone, PA
Weight: __ kg select the desired model size
Inlet: PVC ball valve d20; a d16 hose nozzle is included in the delivery.
Outlet: ABS screw fitting d20; a d16 hose connector is included in the delivery
Connector air scouring: 4 mm nozzle for standard air hose
Lid connection: one G1/4" connection is available
Electrode connection in cover: prepared for electrode set

Instruction manual PMMA filter 70

Leaflet

Upper screen

Lower scree with central tube  select the desired model size

Spare lid

O-ring for main flange 77 x 4

Wing screw M6x20

PA washer d6.5

PA connector for air supply

1/4" closure for auxiliary connector: cap-1/4

Silicone suction feet

Spare ball valve d20 (inlet)

Spare union d20 (outlet)

connector for PVC ball valve d20

connector for PVC union d20

 This filter does not belong in the hands of small children - danger of swallowing small parts!