Ozone reactor OZR100: 20 to 46 m3 ponds

Product no.: OZR-100

In stock
Delivery period: 2-3 working days

from 284.90 €

Price incl. VAT, plus delivery

Model size

Ask question

Ozone reactor with diameter 100 mm made of crystal clear acrylic glass (PMMA) to increase the redox potential and to reduce free floating algae, protozoa and bacteria.

AquaCare has developed a 3-stage ozone reactor for fish ponds and pools. It is a fast and effective way to enrich ozone in water. The dissolved ozone splits biological hardly degradable substances (yellow substance, humic substances) that can be degraded by bacteria in the biofilter afterwards - the water becomes crystal clear. Nitrite is oxidised and cannot have a damaging effect on flora and fauna, especially in the running-in phase of the pond. The oxygen content of the water increases.

Characteristics of the AquaCare ozone reactor:

high effectiveness due to three-stage system
and of course , made of German quality acrylic material

Erection of the filter:

in the filter sump
external (beside, under or over the aquarium)
hang-on (outside at the aquarium)
wall mounting

Necessary accessories:

water inlet supply with enough pressure (bypass of a main pump of a small pump)
ozone supply
ozone resistant hose
ozone resistant check valve

1. stage: in the upper section the feed water is mixed turbulently with ozone containing air. A small air pump should bring in air through the ozone generator into the OZR.
2. stage: within the trickling section the water flows over trickling filter material that realizes a good transit of the ozone into the water.
3. stage: in the water filled section of the OZR the smallest bubbles will stay for a long time in the tube and dissolves more ozone. The outlet water may flow over an activated carbon filter to eliminate surplus ozone or may flow directly into the pool. With the second version the ORP should be controlled to avoid over concentrations that can harm organisms.

Use only pre-filtrated water: otherwise dirt and fibres get caught in the packing and causes more maintenance.

Take attention that the connected air pump will bear down all resistances: check valve(s), ozone generator, hoses, counterpressure of OZR and counter pressure of downstream installed filters, e.g. acitvated carbon.

The counter pressure depends on the choosen water flow (the more flow the higher the counter pressure in the OZR) and if the outlet ball valve is throttled: the higher the counter pressure in the OZR the more ozone will dissolve.

his filter cannot be converted for other purposes!

Filter with lid and ozone connection 1/8" BSP made of PVDF
filter material
outlet ball valve
inlet union
Drain ball valve for 6/4 hoses
Nozzle d16 for inlet and outlet
silicone feet

Necessary Accessories:

feed water pump
ozone supply (air pump, air dryer, ozone generator)
check valve
maybe ORP controller
maybe a downstream activated carbon filter

Diameter: 100 mm
Maximum pond size: __ m³ (for intensive cultures much less; please contact AquaCare) select the desired model size
Reactor height: __ cm select the desired model size
Useful volume: approx. __ litres select the desired model size
Maximum ozone demand: __ mg/h (only with downstream activated carbon filter and/or redox control) select the desired model size
Water feed: 0.8 to 1.5 m³/h
Footprint: 210 x 150 mm
Closure: PA-wing screws
Materials: high quality PMMA (acrylic glass), NBR, silicone, PA
Weight: __ kg select the desired model size
Ozonanschluss: 6/4 hose
Outlet: PVC ball valve d20; a d16 hose nozzle is included in the delivery.
Inlet: ABS screw fitting d20; a d16 hose connector is included in the delivery
Drain connection: G1/4" drain valve for 6/4 hose
Lid connection: one G1/4" connections is available