Skimmer ACF2000V-130 with injector, max. 2000 litres

The aquarium water enriched with air (wooden air stone, injector/venturi or needle wheel) is fed into the unit at the lowest point. Since the highest pressure is in this section, gas exchange is improved. The water-air mixture rises in the reaction tube. There, the protein-containing foam column is formed.
Some of the air bubbles are forced downward through the outer tube by the water flow. At the expansion cone, the water flow slows down as a result of the larger tube diameter. Due to this principle, the air bubbles remain in the water for a particularly long time and accumulate considerably more protein and other substances.
After a long contact time, the bubbles return to the foam section. The foam rises to the top and is slowly dewatered. The solid protein foam loaded with waste material reaches the collecting cup.

Thus, waste materials are effectively and safely removed from the aquarium and the gas balance is stabilised.

• stable base plate
• main tube with flange
• central tube with bubble distributor
• freely rotatable cup with lid and drain
• water level adjustment by means of EasyAdjust system
• redox electrode can be retrofitted for ozone operation
• injector / venturi
• control valve for air
• control valve for water (not for delivery with adjustable energy-saving pump)
• operating instructions

Options:

• spraying nozzles in skimmer lid
• complete flushing system for cup
• gas tight cup for extreme ozone application
• on request with suitable pump
• on request with suitable inlet piping for installation directly at the aquarium (without filter tank)

Maximum aquarium size: 2000 liters*
System: Injector / Venturi
System convertible: yes
Footprint: 250 x 195 mm
Main tube diameter: 120 mm
Total height: 1.3 m
Required height: +5 cm
Height of outlet: 82 cm
Volume of foam cup: 2.4 liters (drain installed)
Automatically sucked air volume: 400 l/h
Pumped water volume: 1300 l/h
Ozone demand (reef aquarium): 40 mg/h (operation without ozone possible)
Materials: PMMA (acrylic glass), PVC, NBR
Empty weight without pump: 6,0 kg
Inlet connection: PVC d25, DN20
Drain connection: PVC d40, DN32

Suitable pumps:
UP6000 100 W (not adjustable)
UP11000 130 W (adjustable, extremely quiet, typical load 80 W)
Red Dragon Exo 5 130 W (adjustable, extremely quiet, typical load 80 W)

* The maximum size of the aquarium is a recommendation. Actual design size depends on many factors, such as: stocking, food quantity, temperature, type of animals, additional installed technology such as biofilter, UV irradiation, ozone use and desired water quality. An exact interpretation can result in sizes that differ greatly from the recommendation. Please consult AquaCare in case of unclear cases (normal reef aquarium).

Leaflet

Instruction manual

  ACF6000V

Info: Somthing about protein skimming

Info: The quality of a protein skimmer

Info: AquaCareFlotor is cleaning the Red Sea

Info: Skimmers for Turkuazoo, Istanbul, Turkey

FAQ: Skimmer

o-ring 126x4: main flange ACF2000V-120

o-ring 100x4: skimmer cup

o-ring 40.6 x 5.3 for water outlet union d40

o-ring 28.2 x 3.5 for inlet union d25

PA screws M6 x 20 for main flange

spare lid for ACF2000

spare cup for ACF2000

injector d25 for energy saving pumps

injector d25 for pressure pumps

PE angle fitting for low to no ozone application 1/4 "a-3/8"s

PVDF angle fitting for high ozone application 1/4 "a-10i

air valve 3/8"

air valve 10/8

air filter outlet tube

central tube with bubble distributor

main tube

support: main tube - outlet tube - inlet tube

double clip: inlet - pump tube

drain valve 1/4"

flat screw plug for skimmer cup

PA Angled nozzle for skimmer cup W1/4"a-10a

Replacement silicone feet

Spare parts for the old series with PVC base (gray) please ask us. 

This filter do not belong in the hands of small children - danger of swallowing small parts!

Ozone operation: Mind the safety instruction of the used ozone generator.

  Mind the safety instructions of the necessary pumps.